A. W. Alexander, B. Chaudhuri, A. Faqih, F. J. Muzzio, C. Davies et al., Avalanching flow of cohesive powders, Powder Technology, vol.164, pp.13-21, 2006.

M. Alizadeh, A. Hassanpour, M. Pasha, M. Ghadiri, and A. Bayly, The effect of particle shape on predicted segregation in binary powder mixtures, Powder Technology, pp.313-322, 2017.

, ASTM B213-17, Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel

A. T. Bell, Evaluation of Edinburgh Powder Tester, Proceedings of PARTEC, 2007.

N. Berger, E. Azéma, J. F. Douce, and F. Radjai, Scaling behaviour of cohesive granular flows, Europhysics Letters), vol.112, p.64004, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01256219

R. J. Berry, M. S. Bradley, and R. G. Mcgregor, Brookfield powder flow tester -Results of round robin tests with CRM-116 limestone powder, Proceedings of the Institution of Mechanical Engineers, vol.229, 2014.

R. Bharadwaj, W. R. Ketterhagen, and B. C. Hancock, Discrete element simulation study of a Freeman powder rheometer, Chemical Engineering Science, vol.65, pp.5747-5765, 2010.

G. Bruni, D. Barletta, M. Poletto, and P. Lettieri, A rheological model for the flowability of aerated fine powders, Chemical Engineering Science, vol.62, pp.397-407, 2007.

G. Bruni, A. Colafigli, P. Lettieri, and T. Elson, Torque measurements in aerated powders using a mechanically stirred fluidized bed rheometer (msFBR), Chemical Engineering Research and Design, vol.83, pp.1311-1318, 2005.

G. Calvert, N. Curcic, C. Redhead, H. Ahmadian, C. Owen et al., A new environmental bulk powder caking tester, pp.323-329, 2013.

M. Capece, R. Ho, J. Strong, and P. Gao, Prediction of powder flow performance using a multi-component granular bond number, Powder Technology, vol.286, pp.561-571, 2015.

A. Carrozza, Characterization of powders to be used in a laser powder bed machine: Analysis of the critical parameters and relationship with powder flowability, 2017.

A. Castellanos, J. M. Valverde, and M. A. Quintanilla, The Sevilla Powder Tester: A tool for characterizing the physical properties of fine cohesive powders at very small consolidations, KONA Powder and Particle Journal, vol.22, pp.66-81, 2004.

A. Castellanos, The relationship between attractive interparticle forces and bulk behaviour in dry and uncharged fine powders, Advances in physics, vol.54, pp.263-376, 2005.

S. Chialvo, J. Sun, and S. Sundaresan, Bridging the rheology of granular flows in three regimes, Physical Review E, vol.85, p.21305, 2012.

P. A. Cundall, Formulation of a three-dimensional distinct element model-Part I. A scheme to detect and represent contacts in a system composed of many polyhedral blocks, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.25, pp.107-116, 1988.

B. V. Derjaguin, V. M. Muller, and Y. P. Toporov, Effect of contact deformations on the adhesion of particles, Journal of Colloid and Interface Science, vol.53, pp.314-326, 1975.

P. S. Desai, A. Mehta, P. S. Dougherty, and C. F. Higgs, A rheometry based calibration of a first-order DEM model to generate virtual avatars of metal Additive Manufacturing (AM) powders, Powder Technology, vol.342, pp.441-456, 2019.

J. F. Favier, M. H. Abbaspour-fard, M. Kremmer, and A. O. Raji, Shape representation of axi-symmetrical, non-spherical particles in discrete element simulation using multi-element model particles, Engineering computations, vol.16, 1999.

R. Fischer, P. Gondret, B. Perrin, and M. Rabaud, Dynamics of dry granular avalanches, vol.78, p.21302, 2008.

R. Freeman, Measuring the flow properties of consolidated, conditioned and aerated powders -a comparative study using a powder rheometer and a rotational shear cell, vol.174, pp.25-33, 2007.

X. Fu, D. Huck, L. Makein, B. Armstrong, U. Willen et al., Effect of particle shape and size on flow properties of lactose powders, pp.203-208, 2012.

F. Fulchini, U. Zafar, C. Hare, M. Ghadiri, H. Tantawy et al., Relationship between surface area coverage of flow-aids and flowability of cohesive particles, vol.322, pp.417-427, 2017.

S. Geer, M. L. Bernhardt-barry, E. J. Garboczi, J. Whiting, and A. Donmez, A more efficient method for calibrating discrete element method parameters for simulations of metallic powder used in additive manufacturing, Granular Matter, vol.20, pp.1-17, 2018.

R. Girimonte, P. Bernardo, A. Minnicelli, and B. Formisani, Experimental characterization of the cohesive behaviour of fine powders by the raining bed test, Powder Technology, vol.325, pp.373-380, 2018.

H. P. Goh, P. W. Heng, and C. V. Liew, Investigation on the impact of powder arching in small die filling, International Journal of Pharmaceutics, vol.551, pp.42-51, 2018.

Y. Guo, C. Y. Wu, K. D. Kafui, and C. Thornton, 3D DEM/CFD analysis of size-induced segregation during die filling, Powder Technology, vol.206, pp.177-188, 2011.

Y. Guo, C. Y. Wu, and C. Thornton, The effects of air and particle density difference on segregation of powder mixtures during die filling, Chemical Engineering Science, vol.66, pp.661-673, 2011.

K. J. Gutam, V. Mehandia, and P. R. Nott, Rheometry of granular materials in cylindrical Couette cells: Anomalous stress caused by gravity and shear, Physics of Fluids, vol.25, p.70602, 2013.

S. Haeri, Optimisation of blade type spreaders for powder bed preparation in Additive Manufacturing using DEM simulations, Powder Technology, pp.94-104, 2017.

Q. Han, H. Gu, and R. Setchi, Discrete element simulation of powder layer thickness in laser additive manufacturing, Powder Technology, vol.352, pp.91-102, 2019.

C. Hare and M. Ghadiri, The influence of aspect ratio and roughness on flowability, API Conference Proceedings, pp.887-890, 2013.

C. Hare, U. Zafar, M. Ghadiri, T. Freeman, J. Clayton et al., Analysis of the dynamics of the FT4 powder rheometer, Powder Technology, vol.285, pp.123-127, 2015.

A. Hassanpour and M. Ghadiri, Characterisation of flowability of loosely compacted cohesive powders by indentation, Particle & Particle Systems Characterization, vol.24, pp.117-123, 2007.

D. Howell, R. P. Behringer, and C. Veje, Stress fluctuations in a 2D granular Couette experiment: A continuous transition, Physical Review Letters, vol.82, pp.5241-5244, 1999.

, Hosokawa Micron Powder Tester PT-X, Standard Test Method for Bulk Solids Characterization by Carr Indices, pp.6393-6401

X. Jia and R. A. Williams, A packing algorithm for particles of arbitrary shapes, Powder Technology, vol.120, pp.175-186, 2001.

K. Johanson, -. Ssspintester, and . Tester, , 2019.

P. Jop, Y. Forterre, and O. Pouliquen, A constitutive law for dense granular flows, Nature, p.441, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01432178

J. F. Klausner, D. Chen, and R. Mei, Experimental investigation of cohesive powder rheology, Powder Technology, vol.112, pp.94-101, 2000.

N. Ku, C. L. Hare, M. Ghadiri, M. J. Murtagh, P. Oram et al., Auto-granulation of fine cohesive powder by mechanical vibration, Procedia Engineering, vol.102, 2015.

M. K. Langroudi, S. Turek, A. Ouazzi, and G. I. Tardos, An investigation of frictional and collisional powder flows using a unified constitutive equation, Powder Technology, vol.197, pp.91-101, 2010.

M. Li, M. Leturia, and K. Saleh, Analysis of the periodic motion in a powder rheometer and development of a new Flowability testing method, KONA Powder and Particle Journal, vol.35, pp.160-171, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02148541

A. López, V. Vivacqua, R. Hammond, and M. Ghadiri, Analysis of screw feeding of faceted particles by discrete element method, 2019.

S. Luding, Cohesive frictional powders: contact models for tension, Granular Matter, vol.10, pp.235-246, 2008.

G. Lumay, F. Boschini, K. Traina, S. Bontempi, J. Remy et al., Measuring the flowing properties of powders and grains, Powder Technology, vol.224, pp.19-27, 2012.

G. Lumay, K. Traina, F. Boschini, V. Delaval, A. Rescaglio et al., Effect of relative air humidity on the flowability of lactose powders, Journal of Drug Delivery Science and Technology, vol.35, pp.207-212, 2016.

C. K. Lun, S. B. Savage, D. J. Jeffrey, and N. Chepurniy, Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flow field, Journal of Fluid Mechanics, vol.140, pp.223-256, 1984.

M. Macaulay and P. Rognon, Shear-induced diffusion in cohesive granular flows: Effect of enduring clusters, Journal of Fluid Mechanics, vol.858, 2019.

P. Mellin, O. Lyckfeldt, P. Harlin, H. Brodin, H. Blom et al., Evaluating flowability of additive manufacturing powders, using the Gustavsson flow meter, Metal Powder Report, vol.72, pp.322-326, 2017.

G. D. Midi, On dense granular flows, The European Physical Journal E, vol.14, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00000959

A. J. Morrison, I. Govender, A. N. Mainza, and D. J. Parker, The shape and behaviour of a granular bed in a rotating drum using Eulerian flow fields obtained from PEPT, Chemical Engineering Science, vol.152, pp.186-198, 2016.

V. R. Nalluri and M. Kuentz, Flowability characterisation of drug-excipient blends using a novel powder avalanching method, European Journal of Pharmaceutics and Biopharmaceutics, vol.74, p.388, 2010.

W. Nan and M. Ghadiri, Numerical simulation of powder flow during spreading in additive manufacturing, Powder Technology, vol.342, pp.801-807, 2019.

W. Nan, M. Pasha, T. Bonakdar, A. Lopez, U. Zafar et al., Jamming during particle spreading in additive manufacturing, Powder Technology, vol.338, pp.253-262, 2018.

W. Nan, M. Ghadiri, and Y. Wang, Analysis of powder rheometry of FT4: Effect of air flow, Chemical Engineering Science, vol.162, pp.141-151, 2017.

W. Nan, V. Vivacqua, M. Ghadiri, and Y. Wang, Numerical analysis of air effect on the powder flow dynamics in the FT4 Powder Rheometer, EPJ Web of Conferences, vol.140, p.3036, 2017.

W. Nan, M. Ghadiri, and Y. Wang, Analysis of powder rheometry of FT4: Effect of particle shape, Chemical Engineering Science, vol.173, pp.374-383, 2017.

Q. B. Nguyen, M. L. Nai, Z. Zhu, C. N. Sun, J. Wei et al., Characteristics of Inconel powders for powder-bed additive manufacturing, Engineering, pp.695-700, 2017.

K. Ogata and . Review, Recent progress on evaluation of flowability and floodability of powder, KONA Powder and Particle Journal, vol.36, pp.33-49, 2019.

L. Parrella, D. Barletta, R. Boerefijin, and M. Poletto, Comparison between a uniaxial compaction tester and a shear tester for the characterization of powder flowability, KONA Powder and Particle Journal, vol.26, pp.178-189, 2008.

M. Pasha, C. Hare, A. Hassanpour, and M. Ghadiri, Analysis of ball indentation on cohesive powder beds using distinct element modelling, Powder Technology, pp.80-90, 2013.

M. Pasha, S. Dogbe, C. Hare, A. Hassanpour, and M. Ghadiri, A linear model of elasto-plastic and adhesive contact deformation, Granular Matter, vol.16, pp.151-162, 2014.

M. Pasha, C. Hare, M. Ghadiri, A. Gunadi, and P. M. Piccione, Effect of particle shape on flow in discrete element method simulation of a rotary batch seed coater, Powder Technology, vol.296, pp.29-36, 2016.

A. V. Potapov and C. S. Campbell, A three-dimensional simulation of brittle solid fracture, International Journal of Modern Physics C, vol.7, pp.717-729, 1996.

L. Pournin, M. Weber, M. Tsukahara, J. A. Ferrez, M. Ramaioli et al., Three-dimensional distinct element simulation of spherocylinder crystallization, Granular Matter, vol.7, pp.119-126, 2005.

H. Qin, Flow behavior of granular materials: quasi-static to inertial transition, Doctoral dissertation, 2000.

L. Qu, Q. T. Zhou, J. A. Denman, P. J. Stewart, K. P. Hapgood et al., Influence of coating material on the flowability and dissolution of dry-coated fine ibuprofen powders, European Journal of Pharmaceutical Sciences, vol.78, pp.264-272, 2015.

P. G. Rognon, J. Roux, M. Naaïm, and F. Chevoir, Dense flow of cohesive granular materials, Journal of Fluid Mechanics, vol.596, pp.21-47, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00371617

L. Rothenburg and R. J. Bathurst, Numerical simulation of idealized granular assemblies with plane elliptical particles, Computers and Geotechnics, vol.11, pp.90015-90023, 1991.

S. B. Savage and M. Sayed, Stresses developed by dry cohesionless granular materials sheared in an annular shear cell, Journal of Fluid Mechanics, vol.142, 1984.

H. Salehi, D. Barletta, M. Poletto, D. Schütz, and R. Romirer, On the use of a powder rheometer to characterize the powder flowability at low consolidation with torque resistances, AIChE Journal, vol.63, pp.4788-4798, 2017.

H. Salehi, D. Sofia, D. Schütz, D. Barletta, and M. Poletto, Experiments and simulation of torque in Anton Paar powder cell, Particulate Science and Technology, vol.36, pp.501-512, 2018.

D. Schulze, A new ring shear tester for flowability and time consolidation measurements, 1st International Particle Technology Forum, pp.11-16, 1994.

J. Schwedes and D. Schulze, Measurement of flow properties of bulk solids, Powder Technology, pp.80066-80074, 1990.

G. I. Tardos, M. I. Khan, and D. G. Schaeffer, Forces on a slowly rotating, rough cylinder in a Couette device containing a dry, frictional powder, Physical of Fluids, vol.10, pp.335-341, 1998.

G. I. Tardos, S. Mcnamara, and I. Talu, Slow and intermediate flow of a frictional bulk powder in the Couette geometry, Powder Technology, vol.131, pp.315-322, 2003.

Y. Tirupataiah and G. Sundararajan, The volume of the crater formed by the impact of a ball against flat target materials: The effect of ball hardness and density, International Journal of Impact Engineering, vol.9, p.90015, 1990.

M. Tirapelle, A. Santomaso, and C. Hare, Characterising powder flowability at high shear rates by the ball indentation method, Chemical Engineering Transactions, vol.76, pp.391-396, 2019.

I. Tomasetta, D. Barletta, P. Lettieri, and M. Poletto, The measurement of powder flow properties with a mechanically stirred aerated bed, Chemical Engineering Science, vol.69, pp.373-381, 2012.

L. Vanel, D. Howell, D. Clark, R. P. Behringer, and E. Clement, Memories in sand: Experimental tests of construction history on stress distribution under sandpiles, Physical Review E, vol.60, 1999.

V. Vidyapati, M. Kheiripour-langroudi, J. Sun, S. Sundaresan, G. I. Tardos et al., Experimental and computational studies of dense granular flow: Transition from quasistatic to intermediate regime in a Couette shear device, Powder Technology, vol.220, pp.7-14, 2012.

V. Vivacqua, A. López, R. Hammond, and M. Ghadiri, DEM analysis of the effect of particle shape, cohesion and strain rate on powder rheometry, Powder Technology, vol.342, pp.653-663, 2019.

S. K. Wilkinson, S. A. Turnbull, Z. Yan, E. H. Stitt, and M. Marigo, A parametric evaluation of powder flowability using a Freeman rheometer through statistical and sensitivity analysis: A discrete element method (DEM) study, Computers & Chemical Engineering, pp.161-174, 2017.

J. R. Williams and A. P. Pentland, Superquadrics and modal dynamics for discrete elements in interactive design, Engineering Computations, vol.9, pp.115-127, 1992.

H. Yang, G. L. Jiang, H. Y. Saw, C. Davies, M. J. Biggs et al., Granular dynamics of cohesive powders in a rotating drum as revealed by speckle visibility spectroscopy and synchronous measurement of forces due to avalanching, Chemical Engineering Science, vol.146, pp.1-9, 2016.

U. Zafar, C. Hare, A. Hassanpour, and M. Ghadiri, Drop test: A new method to measure the particle adhesion force, Powder Technology, vol.264, pp.236-241, 2014.

U. Zafar, C. Hare, A. Hassanpour, and M. Ghadiri, Ball indentation on powder beds for assessing powder flowability: Analysis of operation window, pp.300-306, 2017.

U. Zafar, C. Hare, A. Hassanpour, and M. Ghadiri, Effect of Strain Rate on Powder Flow Behaviour Using Ball Indentation Method, Personal Communication, 2019.